Tel. +49 7351 6564

Fax +49 7351 9389

Riedlinger Strasse 42
88400 Biberach

Magnetic Chuck for HM Knives Regrinding

Magnetic Chuck for HM Knives Regrinding

The magnetic chuck is suitable for holding carbide (HM) tools, used for woodworking during re-grinding operations. It is especially suited for linear or surface grinders because the supporting bed is parallel with the magnetic surface. The chuck has a strong holding power because the tools lay directly onto the magnets and so you can re-sharpen very small pieces. The upper part of the chuck is made of BRASS, and that grants a longer life of the tool. The magnetic chuck can be:

  • secured to any type of magnetic chuck
  • mechanically bolted by means of the four holes around the edges, aligning or flanking a number of chucks.

The chuck is available in two sizes:

  • part no. 452 5221500 - 200 x 70 x 20 [mm]
  • part no. 452 5221600 - 400 x 70 x 20 [mm]

By aligning or flanking a number of magnetic chucks, extremely strong magnetic surfaces can be obtained.

© Streitlein GmbH, 2018

Home | Sitemap | Contact

Riedlinger Strasse 42
88400 Biberach
Phone +49 7351 6564
Fax +49 7351 9389
info@streitlein.com