Tel. +49 7351 6564

Fax +49 7351 9389

Riedlinger Strasse 42
88400 Biberach

ML 600

Brazing Attachment (with welding torch) ML 600

 

Brazing Attachment (with welding torch) ML 600

For the brazing on and off carbide teeth on: carbide circular saw blades, cutters and milling cutters in need of repair. The set-up time is very brief much faster than with resistance welding and of higher quality.
 

Handling:

The saw-blade is centered and clamped by means of the magnetic flange. The angles are adjusted by means of the handwheels. The new tooth is brought into position and centered by means of a clamping device and by a turning of the screw. The tooth and the ground bodies are heated with a blowtorch.

The brazing off of the defective teeth:

The defective teeth or rests of teeth are heated with the blowtorch pushed down with a pin, a screw driver or the like.

© Streitlein GmbH, 2019

Home | Sitemap | Contact

Riedlinger Strasse 42
88400 Biberach
Phone +49 7351 6564
Fax +49 7351 9389
info@streitlein.com