Tel. +49 7351 6564

Fax +49 7351 9389

Riedlinger Strasse 42
88400 Biberach

FL 600 and FL 700

Manual Single Side Grinder for Carbide Tipped Saw Blades Type FL 600 and FL 700

Are you looking for a quick, economical way to side grind your retipped teeth down to the size wanted?… This is the machine. High precision grinding spindle, sturdy construction, flood coolant and ample motor power will remove any amount of carbide in one pass. Magnetic saw holder, accurate and fast.

Manual Single Side Grinder for Carbide Tipped Saw Blades Typ FL 600 and FL 700

 

FL 600 FL 700
  The same appliance but a more powerful model to allow side grinding also of strobe saws.
Technical data: Technical data:
Weight: approx. 80 kg Weight: approx. 105 kg
Dimensions: 800 mm long, 500 mm wide,    580 mm high Dimensions:800 mm long, 700 mm wide,     580 mm high
Coolant content: 28 Litres Coolant content: 48 Litres
Operating voltage: 230/440 V, 50 cycles
230/440 V,60 cycles
other voltage on request
Operating voltage: 230/440 V, 50 cycles
230/440 V,60 cycles
other voltage on request
Drive output: 0,75 kW, 2830 N Drive output: 0,75 kW, 2830 N
Grinding spindle speed: 4700 N Grinding spindle speed: 4700 N
Spindle drive by means of flat belt Spindle drive by means of flat belt
Grinding wheel diameter: 75 and 100 mm Grinding wheel diameter: 75 and 100 mm
Adjustment range: 35 mm,
1 revolution=1mm, 1 graduation=0,01 mm
Adjustment range: 35 mm,
1 revolution=1mm, 1 graduation=0,01 mm
Grinding strobe: 45 mm Grinding strobe: 170 mm
Angular adjustment: Angular adjustment:
Orthogonal clearance : + and – optionally adjustable Orthogonal clearance : + and – optionally adjustable
Orthogonal rake: + and – optionally adjustable Orthogonal rake: + and – optionally adjustable
Tangential angle, positive optionally adjustable, negative up to 17° adjustableTangential angle, positive optionally adjustable, negative up to 17°
Max. saw diameter: 600 mm Max. saw diameter: 700 mm
Min. saw diameter: 60 mm Min. saw diameter: 60 mm
Max. bore fixture: 150 mm, Max. bore fixture: 150 mm,
bigger dia. on request bigger dia. on request
Min. bore diameter: 10 mm Min. bore diameter: 10 mm

© Streitlein GmbH, 2019

Home | Sitemap | Contact

Riedlinger Strasse 42
88400 Biberach
Phone +49 7351 6564
Fax +49 7351 9389
info@streitlein.com