Tel. +49 7351 6564

Fax +49 7351 9389

Riedlinger Strasse 42
88400 Biberach

Magnetic Chuck for HM Knives Regrinding

The magnetic chuck is suitable for holding carbide (HM) tools, used for woodworking during re-grinding operations. It is especially suited for linear or surface grinders because the supporting bed is parallel with the magnetic surface. The chuck has a strong holding power because the tools lay directly onto the magnets and so you can re-sharpen very small pieces. The upper part of the chuck is made of BRASS, and that grants a longer life of the tool. The magnetic chuck can be:

  • secured to any type of magnetic chuck
  • mechanically bolted by means of the four holes around the edges, aligning or flanking a number of chucks.

The chuck is available in two sizes:

  • part no. 452 5221500 - 200 x 70 x 20 [mm]
  • part no. 452 5221600 - 400 x 70 x 20 [mm]

By aligning or flanking a number of magnetic chucks, extremely strong magnetic surfaces can be obtained.

DESCRIPTION
The fixed open-field magnetic chuck is suitable for affixing hard-metal inserts used in woodworking industries, and thereby holding them firmly during the re-grinding process.

The inserts are positioned on top of the magnets, which have an extremely high magnetic force.

It is suitable also for smaller work-pieces.
It can be used on most straight knife grinding machines, and can be fixed on either a standard magnetic chuck or a mechanical table.

 

© Streitlein GmbH, 2019

Home | Sitemap | Contact

Riedlinger Strasse 42
88400 Biberach
Phone +49 7351 6564
Fax +49 7351 9389
info@streitlein.com