Tel. +49 7351 6564

Fax +49 7351 9389

Riedlinger Strasse 42
88400 Biberach

KS250

grat value straight knife grinder suitable mostly for big knives.

  • Grinding length up to 7100 mm
  • automatic downfeed of the grinding wheel
  • rotating table from 0° - 90°
  • magnetic table
  • variable carriage speed
  • PLC (digital programmer)

KS250

DESCRIPTION
The KS 250 model grinding machine is available with grinding lengths ranging from 1500 mm to 7100 mm, and longer for special grinding purposes. It features a heavy-duty reinforced machine base which gives the machine maximum stability. Fully covered upper and side guides are standard. The KS 250 grinding machine features a PLC that controls the complete grinding program and carriage movement during the various stages of the working cycle. The KS 250 is suitable for a broad range of industrial straight knives, such as chipper knives, granulator blades, veneer knives, guillotine blades and paper knives.

 

 

Technical features of the KS 250 grinding machine:

  • Rotating magnetic chuck from 0° to 90° (Polarity 20 mm);
  • Grinding motor 5,5 kW (7,5 HP);
  • Segment holding ring Ø250;
  • Variable carriage speed from 1 to 30 m/min with carriage run adjustment
  • Automatic grinding wheel downfeed and fully programmable working cycle by means of a digital programmer (PLC);
  • Programmable work cycles: roughing, finishing, spark-out;
  • Longitudinal grinding head angle adjustment from 0° to 3°;
  • Grinding wheel quick up and down approach, and slow down approach;
  • Separate coolant collection tank fitted with 80 l/min. motor pump;

UPON REQUEST

  • Grinding motor 7,5 kW (10 HP);
  • Grinding motor 9,5 kW (13 HP);
  • Thin polarity magnetic chuck 12/14 mm;
  • Quick change of the grinding wheel;
  • Variable grinding wheel speed;
  • Slow carriage speed 0,3 mt/min;
  • Angular divisor for magnetic chuck +/- 90°;
  • RTS Level detector – wheel wear compensation system;
  • Automatic lubrication;
  • Magnetic coolant cleaner with rotating discs;
  • Coolant cleaner with paper filter manual or automatic;
  • Additional super-finishing grinding head;
  • Additional grinding head 3,7 kW (5 HP) with automatic or manual downfeed;
  • Extraction system.

© Streitlein GmbH, 2019

Home | Sitemap | Contact

Riedlinger Strasse 42
88400 Biberach
Phone +49 7351 6564
Fax +49 7351 9389
info@streitlein.com